Question 1

Why won't my UPVC door lock properly in Accrington?

Accepted Answer

The most common cause is a worn gearbox mechanism inside the door. Over time the gearbox wears out and the multipoint locking rods no longer engage correctly. Gary can usually replace the gearbox without removing the door, getting your lock working again the same day.

Question 2

What is a UPVC door gearbox and how do I know if mine is broken?

Accepted Answer

The gearbox is the central mechanism inside a UPVC door that drives the locking rods up and down when you lift the handle and turn the key. Signs it is failing include a handle that is stiff to lift, a door that takes several attempts to lock, or locking rods that fail to engage at the top or bottom of the door.

Question 3

Can you fix a UPVC door that will not close fully?

Accepted Answer

If the door will not close, the issue may be with the hinges, the keep alignment or the door dropping over time. Gary can diagnose and adjust or replace the relevant components to restore a proper close and seal.

Question 4

How much does a UPVC gearbox replacement cost in Lancashire?

Accepted Answer

Gary provides a fixed, all-inclusive price before starting. The cost depends on the make and size of mechanism needed. Call 07809 176 552 for a free quote based on your door type.

Question 5

Are UPVC doors vulnerable to lock-snapping attacks?

Accepted Answer

UPVC doors fitted with standard euro cylinders are vulnerable to a technique called cylinder snapping. Gary strongly recommends upgrading to an anti-snap euro cylinder, which has a sacrificial section that breaks before exposing the lock mechanism. He carries these in stock.

Question 6

Can you replace just the euro cylinder on my UPVC door?

Accepted Answer

Yes. If the gearbox is in good condition but the cylinder is worn, damaged or a standard non-anti-snap type, Gary can replace just the cylinder. He will measure the existing cylinder to find an exact or compatible replacement.

Question 7

My UPVC door handle has dropped. Is that a locksmith job?

Accepted Answer

A dropped handle is often caused by a worn gearbox or a loose fixing screw. Gary can diagnose the cause and replace the handle, gearbox or both as needed. It is a common job he carries parts for on the van.

Question 8

Can you repair a UPVC door that has been forced open?

Accepted Answer

Yes. Forced entry on a UPVC door typically damages the cylinder, the keep and sometimes the gearbox. Gary can assess the full extent of the damage and replace all affected components to restore full security.

Question 9

Do you carry spare UPVC mechanisms for common door brands?

Accepted Answer

Gary stocks mechanisms for the most common UPVC door brands and sizes found across Lancashire housing. He will confirm compatibility before attending to maximise the chance of a single-visit repair.

Question 10

How do I know what size euro cylinder I need for my UPVC door?

Accepted Answer

Gary will measure the cylinder when he arrives and select the correct size. If you want to confirm beforehand, measure from the centre of the screw hole to each end of the cylinder and quote both measurements when you call.

UPVC Door Lock Repairs in Accrington, Lancashire | Gary Korab

What's Included

Frequently Asked Questions

Get a Free Quote Today